RPS 2300 with 2921 router

Unanswered Question
Feb 24th, 2010
User Badges:


  I have a 2921 with a RPS-Adptr-2921-51 installed and connected to a RPS 2300.

I plugged the router and RPS to 2 different circuits, the router powers up but when I pull the power to the internal power supply of the router, it powers down and doesnt return even with the RPS powered on.

I also notice the "RPS" indicator light on the RPS-Adptr-2921-51 is not lit.

This router is the only device connected to the RPS.

Is there a step i missed during the setup?

Thanks in advance.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
sudip.acharya1 Wed, 02/24/2010 - 08:38
User Badges:



powered both units off
plugged in the 2921 to rps
plugged in rps to power (left internal power of 2921 unplugged)
waited 1 minute, rps and router powered on
a minute after that, rps stayed on, router powered off


This Discussion