Solved: Devices steel in learning mode in DFM

ocaron · ‎02-24-2010

Windows 2003 R2

LMS 3.2

DFM 3.2.0

CM 5.2.1

RME 4.3.1

Hello,

All my device steel in learning mode.

Also I have this error on the page DFM - Device Management - Device Import - Auto Allocation

Error in getting instance of TreeGenerator class
com.cisco.nm.trx.kdm.utils.DcrGroupSelectorTreeGenerator
Root Cause:com.cisco.nm.xms.ctm.common.CTMException: URN_NOT_FOUND : urn "ogs_server_urn" : Not found !!

Joe Clarke · ‎03-08-2010

Is the fully-qualified hostname, 5VA-VAL-A5TR503.valcartier.mil.ca resolvable on this server? That is, what output do you get for:

NMSROOT/bin/perl NMSROOT/bin/resolver.pl 5VA-VAL-A5TR503.valcartier.mil.ca

View solution in original post

Joe Clarke · ‎03-01-2010

First, try rebooting the server. This will rule out a process state issue. If the problem persists, post the output of the pdshow command.

ocaron · ‎03-01-2010

This is the post you want.

We use a static IP for the server and the SNMP works well for RME and CM.

Joe Clarke · ‎03-01-2010

Did you do the reboot? Is the problem persisting after the reboot?

ocaron · ‎03-01-2010

Hello

I just reboot the server again and the problem persist.

Here again the pdshow

Joe Clarke · ‎03-01-2010

Post the NMSROOT/objects/smarts/local/logs/DFM.log and DFM1.log as well as any error messages you see in the Windows Event Viewer.

ocaron · ‎03-02-2010

This the posts

Thanks

Also I noticed for a while, in my CM windows. I have no jobs in the completed job.

But in CS and RME jobs are presents.

May be my problem is upstream of DFM ?

Joe Clarke · ‎03-02-2010

Post the DFMOGSServer.log, and the output of the command:

NMSROOT/objects/smarts/bin/brcontrol

ocaron · ‎03-08-2010

The posts

Joe Clarke · ‎03-08-2010

Is the fully-qualified hostname, 5VA-VAL-A5TR503.valcartier.mil.ca resolvable on this server? That is, what output do you get for:

NMSROOT/bin/perl NMSROOT/bin/resolver.pl 5VA-VAL-A5TR503.valcartier.mil.ca

ocaron · ‎03-09-2010

Your the man.

Thanks alot.

The problem came because this server is not in the same domain of the main network.

Michel Hegeraat · ‎03-01-2010

I got exactly the same error message.

It went away when I could use a static IP address for the LMS server.

My devices however did move to the 'known' state.

If they remain learning at 10% it often means that there is an SNMP connectivity issue.

Cheers,

Michel

ocaron · ‎03-01-2010

May be the problem is during the process of CM. I don't know.

It's seem that the process between RME and CM is OK. But from CM to DFM ....

I post the pdshow and I will wait from the answer of mister Clarke.

ocaron · ‎03-01-2010

To helping you to understand the problem.

I try to change the poling configuration in DFM and I received this message.

Could not retrieve current data since the PTMServer process is down.

Please restart the process and perform this operation again.

But the PTMServer is running

Peter_Setaffy · ‎03-15-2010

Hallo

I have also the problem.

This is my version LMS:

LMS 2.5

CiscoWorks Common Services 3.0.3
Campus Manager 4.0.3
CiscoView 6.1.2
Device Fault Manager 2.0.3
Integration Utility 1.6.0
Resource Manager Essentials 4.0.3

Can someone help me?

thanks