ā02-24-2010 12:48 PM - edited ā03-06-2019 09:53 AM
Hi,
Vlan 70 and vlan 83 exist on 6513 floor switch 1 . This floor switch is tied to core switch 2. I have attached a Diagram of the scenario.
SVI for vlan 70 and 83 sit on Core 1.
My workstation is on vlan 70 and when i do a ping to a workstaion on vlan 83 it works but when i do a trace to the same desktop on vlan 83 it stops on Core 1 and i dont see the trace going to hte workstation
Can anybody explain why this is hapenning.
Thanks
ā02-24-2010 08:18 PM
Do you have no ip unreachables enabled on any of the SVIs?
ā02-25-2010 05:35 AM
Hi Ediison,
"No IP unreachables " is not enabled on any of the SVI's
Thanks
ā02-25-2010 05:41 AM
Hi,
any personal Fw involved on the PCs?
BR,
Milan
ā02-25-2010 06:12 AM
Hi
I can ping the Workstation but trace doesn't work
i have question aren't ping and trace both the same (ICMP)
ā02-25-2010 06:19 AM
Hi,
ping is working with ICMP and trace is working with UDP packets.
can you check is there any desktop firewall in your both workstations.
regards
karuppu
ā02-25-2010 06:40 AM
Hi,
Cisco trace is using UDP but Microsoft tracert is using ICMP.
The difference between Ping and traceroute then is the traceroute works with TTL - it sends packets with TTL=1, 2, 3,...
And the routers on the path are replying with ICMP "TTL expired" responses.
The target device should respond with a different ICMP message (Host unreachable, I think) though.
BR,
Milan
ā02-25-2010 06:57 AM
Hi,
you mean if i can ping the workstation the firewall is stopping trace packets (UDP)
Is this possible?
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: