WRV200 DDNS-Update fails at PPTP Connection

Unanswered Question
Feb 25th, 2010
User Badges:


I'm using the WRV200 Router (1.0.39) with an ADSL-Modem (Thomson) to connect to an Austrian ISP. So i have to use the PPTP-Connection to "dial in".

When i'm using this setting DDNS-Update via dyndns.org fails. The Status always says "diasabled". (The Account-Settings are checked)

A second WRV200 at another location uses a solid WAN-IP. This Router doesn't have any Problems with DDNS.

How can i solve this Problem?

Can you explain me the difference between normal and ETSI-Firmware?

Best regards


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
josruiz Mon, 03/01/2010 - 14:10
User Badges:

Hello Mr. Mosquito; the best advise that I can give you at this time is to follow this steps then retry to establish your connection,

-- factory default your router

--Down and uplaod the latest firmware into you router

--Manually reconfigure your router-----( DO NOT UPLOAD THE OLD CONFIGURATION)

-- Do a port forwarding with the server's LAN ip address under the port forwading tab in your router

Note:don't forget to create your account in your server before establishing any PPTP connection. If this does not work please contact us at 1866-606-1866 US/Canada.


This Discussion

Related Content