6.1(2) to 7.1(3)B Upgrade

Answered Question
Feb 25th, 2010

Hi,

I am looking for clarification on upgrading from 6.1.2.1000-13 to 7.1(3)B.

I ordered the upgrade disks and have a disk to upgrade from 6.X to 7.1(3)B.

7.1(3)B release notes indicate that an upgrade is not possible from 6.1.2 but from 6.1.3 or higher.

I believe that I must upgrade to 7.1(2) as an interim step before upgrade to 7.1(3)B. Is this correct?

thanks

Ian.

Message was edited by: iwearing

I have this problem too.
0 votes
Correct Answer by rob.huffman about 6 years 9 months ago

Hi Ian,

You really have two choices here

You can upgrade to a 6.1(3) version as a first step or 7.1(2) as

you correctly noted. Either way would be supported.

Cisco Unified Communications Manager Software Compatibility Matrix

Table 5 Supported Cisco Unified Communications Manager Upgrades for Release 7.1(x)

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/compat/ccmcompmatr.html#wp108792

Tons of great info!

Take care,
Rob

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
rob.huffman Thu, 02/25/2010 - 05:53

Hi Ian,

You really have two choices here

You can upgrade to a 6.1(3) version as a first step or 7.1(2) as

you correctly noted. Either way would be supported.

Cisco Unified Communications Manager Software Compatibility Matrix

Table 5 Supported Cisco Unified Communications Manager Upgrades for Release 7.1(x)

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/compat/ccmcompmatr.html#wp108792

Tons of great info!

Take care,
Rob

iwearing Thu, 02/25/2010 - 06:06

Rob,

Thanks for the clarification.

I have a set of 7.0(2a) disks which I can use as an interim step from 6.1(2) to 7.1(3b)

thanks

Ian.

Actions

This Discussion