02-25-2010 05:31 AM - edited 03-15-2019 09:32 PM
Hi,
I am looking for clarification on upgrading from 6.1.2.1000-13 to 7.1(3)B.
I ordered the upgrade disks and have a disk to upgrade from 6.X to 7.1(3)B.
7.1(3)B release notes indicate that an upgrade is not possible from 6.1.2 but from 6.1.3 or higher.
I believe that I must upgrade to 7.1(2) as an interim step before upgrade to 7.1(3)B. Is this correct?
thanks
Ian.
Message was edited by: iwearing
Solved! Go to Solution.
02-25-2010 05:53 AM
Hi Ian,
You really have two choices here
You can upgrade to a 6.1(3) version as a first step or 7.1(2) as
you correctly noted. Either way would be supported.
Cisco Unified Communications Manager Software Compatibility Matrix
Table 5 Supported Cisco Unified Communications Manager Upgrades for Release 7.1(x)
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/compat/ccmcompmatr.html#wp108792
Tons of great info!
Take care,
Rob
02-25-2010 05:53 AM
Hi Ian,
You really have two choices here
You can upgrade to a 6.1(3) version as a first step or 7.1(2) as
you correctly noted. Either way would be supported.
Cisco Unified Communications Manager Software Compatibility Matrix
Table 5 Supported Cisco Unified Communications Manager Upgrades for Release 7.1(x)
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/compat/ccmcompmatr.html#wp108792
Tons of great info!
Take care,
Rob
02-25-2010 06:06 AM
Rob,
Thanks for the clarification.
I have a set of 7.0(2a) disks which I can use as an interim step from 6.1(2) to 7.1(3b)
thanks
Ian.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: