Cisco 7931 Extension Mobility issue.

Unanswered Question
Feb 25th, 2010

Dear Networkers,

I have CCM 6.0.1-3000-7 cluster installed (1 Publisher + 1 Subscriber).

All services are up and running. We have 4 x Cisco 7931 IP Phones. 8 different lines are assigned to each Cisco 7931 IP Phone and Extension Mobility is enabled on these IP Phones.

I have created 4 Device Profiles (Type 7931) and assigned 8 new Lignes to each Device Profile.

The issue is that when I login with Extension Mobility, Some lines of the Device Profile are not assigned. and we got the following Messsage : Line not assigned !

When i logout with Extension Mobility, all the 8 lines are assigned correctly th old values.

Can you please advise. It's really urgent.

Thanks in advance.

Best Regards.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
haouaswajih Thu, 03/04/2010 - 03:25


I did not open a TAAC case.

It sounded like a bug for me. I just upgraded the CCM CLuster from 6.0(1) to 6.1(2) and the issue was resolved.



This Discussion