02-25-2010 07:23 AM - edited 03-11-2019 10:14 AM
Hi,
We would like to set up VPN tunnel with another location, but they both have same ip addressing.
For instance:
Location A: 10.1.0.0/16 (ASA firewall)
Location B: 10.1.0.0/16 (ASA firewall)
Is there any Cisco documentation I can follow??
Thanks
Solved! Go to Solution.
02-25-2010 07:52 AM
Hi,
You need to do Policy NAT for the VPN traffic (NAT on both sides of the tunnel so traffic won't overlap).
You can try following the configuration from the first ASA on this link:
The idea is to NAT the interesting traffic on both ends, and define the VPN traffic as the NATed traffic.
Hope to help.
Federico.
02-25-2010 07:52 AM
Hi,
You need to do Policy NAT for the VPN traffic (NAT on both sides of the tunnel so traffic won't overlap).
You can try following the configuration from the first ASA on this link:
The idea is to NAT the interesting traffic on both ends, and define the VPN traffic as the NATed traffic.
Hope to help.
Federico.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide