02-25-2010 08:31 AM - edited 03-04-2019 07:37 AM
Hello, I have an interesting issue effecting one of my nodes. I am able to successfully ping using a 1500 byte frame but get high packet loss when using a standard 100 byte frame? Anyone seen this? I am going to have a tech go and connect to another port to see if its an issue on the port. Here is an example:
Type escape sequence to abort.
Sending 100, 100-byte ICMP Echos to 172.xxx.xxx.xxx, timeout is 2 seconds:
!!!!!!!!!..!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.!!!!!!!!!!!!!!!!!!!!!
!!.!!!!!!!.!!!!!!!!!!!!!!!!!!!
Success rate is 95 percent (95/100), round-trip min/avg/max = 4/8/24 ms
Type escape sequence to abort.
Sending 100, 1500-byte ICMP Echos to 172.xxx.xxx.xxx, timeout is 2 seconds:
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Success rate is 100 percent (100/100), round-trip min/avg/max = 12/17/28 ms
03-04-2010 05:48 AM
Hello Brent,
did the port change provide you a solution to this issue?
Hope to help
Giuseppe
03-08-2010 07:34 AM
Morning Giuseppe, sorry to reply so late, no the port change did not fix the issue. We are still seeing this present on many of our Nodes.
Brent
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: