×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Remote Desktop Connection Via 2 ASA FW

Unanswered Question
Feb 25th, 2010
User Badges:

Hi Gentlemen,

                   Could any one help to advise the remote desktop connection between the 2 ASA 5510 FW IP Sec Tunnel connection?

I have already setup the the 2 remote sites via the 2 ASA FW IPSec Tunnnel and would like to remote desktop to Site A from the Site B. But one of the problem PC ( Windows XP Professional ) is still having problem to remotely connect.When I remote desktop to that PC, the remote desktop window pop up but the login screen didn't show up and finally it time out . I' m able to ping that PC and remote desktop connnection port is als opened as well.



From the command prompt


c:\ telnet 192.168.1.x 3389

( The port is opened ) .


The Current Config is as per attach file.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
yamramos.tueme Wed, 03/10/2010 - 10:50
User Badges:

Hi Nay!


Perhaps you can try adjusting the mss.  You can do this with the following command:


sysopt connection tcpmss 1300


Default is 1380...


You can give that a try.


Cheers!

Actions

This Discussion