The problem here is when i call US numbers they see 'unknown number' as calling party.
My setuplooks like this : Cisco Phone -> CUCM 7.0 -> h323 gateway(3845) -> PRI line
When i debug outbound calls , i see this below.
Calling Number=2009,(Calling Name=)(TON=Unknown, NPI=ISDN, Screening=Not Screened, Presentation=Allowed),
Would be greatful if you guys guide me how to configure CLI format as International and TON/ANT as 1 in h323 gateway else any other configuration needs to be done to get CLI on called party phones.
Appreciate your quick response.
As indicated above, it is a telco problem and you cannot do anything about it.
The reason is almost every international call goes to the user as unknown number.
The fact itself that some calls show the number clearly indicates that it depends by the route used by telco for the US, that can be different from a call to another.
Please remember to rate useful posts clicking on the stars below.