02-25-2010 11:01 PM - edited 03-15-2019 09:33 PM
Hi everyone,
I have gone through many blogs but couldnt find the one which i needed here.My setup looks like this
FAX machine -> ATA 186 -> CUCM 7.0 -> hh323 gateway ->PRI .
The problem is when i connect analog phones to one of the ports of ATA , got dial tone, can speak to other end ,works good but when i connect fax machine to the same port , getting dial tone , not able to send/receive fax.Looks strange for me.
Looking for your guys..
shiv
Solved! Go to Solution.
02-26-2010 06:46 AM
Check the settings on the fax machine, make sure error correction is off, you will probably also have to turn the speed down on the fac machine to less than 14.4, we have even had to go 9600 to make sure longer faxes make it through.
02-26-2010 06:46 AM
Check the settings on the fax machine, make sure error correction is off, you will probably also have to turn the speed down on the fac machine to less than 14.4, we have even had to go 9600 to make sure longer faxes make it through.
02-28-2010 09:55 PM
thank you so much for your valid points.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide