I solved one problem from the discussion "Static NAT on PIX 501 help", but now I have no internet connectivity when that tunnel comes up. I have attached my current PIX 501 config. Any suggestions would be appreciated.
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
access-list PAT permit ip 192.168.1.0 255.255.255.0 any
nat (inside) 1 access-list PAT
my thinking here is that once you start with policy NAT, all your NAT must work that way... I'm not truly sure it'll work, but I think it's worth a shot.
It wont break the static NAT because that is processed ahead of the NAT statement.