03-01-2010 07:27 AM - edited 03-04-2019 07:39 AM
Hi
I have a VTP server on Cisco 3750 with this configuration:
#sh vtp status
VTP version : 2
Configuration Revision : 31
..
VTP V2 Mode : Disabled
I connect a 2960 on this VTp server and i get:
#sh vtp status
VTP Version : running VTP1 (VTP2 capable)
Configuration Revision : 31
Maximum VLANs supported locally : 255
Number of existing VLANs : 20
VTP Operating Mode : Client
VTP Domain Name : DOMAINE
VTP Pruning Mode : Enabled
VTP V2 Mode : Disabled
VTP Traps Generation : Disabled
On the othe client VTP client I have a VTP Version = 2.
But on my new 2960, i receive all of Vlan...
Is there any probleme?
Thanks for your help.
Nicolas
Solved! Go to Solution.
03-01-2010 07:43 AM
Hi Nicolas,
#sh vtp statusVTP Version : running VTP1 (VTP2 capable)
Configuration Revision : 31
Maximum VLANs supported locally : 255
Number of existing VLANs : 20
VTP Operating Mode : Client
VTP Domain Name : DOMAINE
VTP Pruning Mode : Enabled
VTP V2 Mode : Disabled
VTP Traps Generation : Disabled
You need to check the highlight field to find what VTP version is running. The top VTP version just tell you this switch is able to do VTP v2 or not.
HTH,
Lei Tian
03-01-2010 07:43 AM
Hi Nicolas,
#sh vtp statusVTP Version : running VTP1 (VTP2 capable)
Configuration Revision : 31
Maximum VLANs supported locally : 255
Number of existing VLANs : 20
VTP Operating Mode : Client
VTP Domain Name : DOMAINE
VTP Pruning Mode : Enabled
VTP V2 Mode : Disabled
VTP Traps Generation : Disabled
You need to check the highlight field to find what VTP version is running. The top VTP version just tell you this switch is able to do VTP v2 or not.
HTH,
Lei Tian
03-01-2010 08:13 AM
Okay on server and client i have "VTP V2 Mode : Disable"
Thanks you!!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: