Hello,
I have a PIX with a 10 MB internet connection. This PIX has several L2L VPN Tunnels configured: Tunnel1, Tunnel2...TunnelN. I want to be able guarentee 5Mb of the total 10Mb to a specific VPN Tunnel. Is this possible? I have read the following links, however I believe that the configuration guidelines I'm looking for are a combination of several examples shown here:
http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a008080dfa7.shtml#tab4
https://supportforums.cisco.com/docs/DOC-1230
http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_tech_note09186a008084de0c.shtml#cqos
The tunnel is being defined by the following commands:
crypto map prdmay 20 match address vpn_1
crypto map prdmay 20 set peer 61.172.142.222
crypto map prdmay 20 set transform-set TS
access-list vpn_1 extended permit ip 10.14.102.0 255.255.255.0 any
access-list vpn_1 extended permit ip 10.14.101.0 255.255.255.0 any
tunnel-group 61.172.142.222 type ipsec-l2l
tunnel-group 61.172.142.222 ipsec-attributes
pre-shared-key *
Is the following what I need to do in order to accomplish what I want:
priority-queue outside
class-map vpn_5Mb
match access-list vpn_1
match tunnel-group 61.172.142.222
policy-map police-priority-policy
class vpn_5Mb
police output 5120000
service-policy police-priority-policy interface outside
Thank you for your help.