03-02-2010 03:58 AM - edited 03-11-2019 10:16 AM
Hi, All
Is ASA5520-CSC10-K9 bundle support HA feature set or We have to buy another HA license for the same?
Because I want to buy 2 Nos. of ASA5520-CSC10-K9 for running in HA mode but it's not showing any HA feature set in configuration tools.
Solved! Go to Solution.
03-02-2010 07:32 PM
Sandeep,
If you have ASA5520 in a failover pair and you choose to have a CSC module then, both units should have a CSC module for hardware compatibility.
If one unit's CSC module goes down then the other unit (which is presently active) will take over and the CSC module in it will start to scann the traffic.
Here is the link to configure the CSC module in failover:
http://www.cisco.com/en/US/docs/security/csc/csc63/administration/guide/csc6.html#wp1041777
There is no failover license in particular for the CSC module. It is same base and the plus license that you always get.
-KS
03-02-2010 07:32 PM
Sandeep,
If you have ASA5520 in a failover pair and you choose to have a CSC module then, both units should have a CSC module for hardware compatibility.
If one unit's CSC module goes down then the other unit (which is presently active) will take over and the CSC module in it will start to scann the traffic.
Here is the link to configure the CSC module in failover:
http://www.cisco.com/en/US/docs/security/csc/csc63/administration/guide/csc6.html#wp1041777
There is no failover license in particular for the CSC module. It is same base and the plus license that you always get.
-KS
03-03-2010 11:07 PM
Thanks for reply
U mean to say that this ASA5520-CSC10-K9 bundle support HA feature set which is ordered through cisco configuration tool ?
or
I have to ordered separate AS5520-K9 bundle box with HA license and separate CSC10 module?
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: