Memory erros in cisco 2811 router

georgedipu · ‎03-02-2010

hi all,

I am getting below error message in my Cisco 2811 router
IOS of the router is:c2800nm-advsecurityk9-mz.124-4.T1.bin

Process= "Pool Manager", ipl= 0, pid= 5
-Traceback= 0x40C32960 0x400B0F98 0x400B66C8 0x400D1E18 0x4036FF40 0x400D54B4 0x
Mar 3 04:05:48.901: %SYS-2-MALLOCFAIL: Memory allocation of 65548 bytes failed
Pool: I/O Free: 1655888 Cause: Memory fragmentation
Alternate Pool: None Free: 0 Cause: No Alternate pool

-Process= "Pool Manager", ipl= 0, pid= 5
-Traceback= 0x40C32960 0x400B0F98 0x400B66C8 0x400D1E18 0x4036FF40 0x400D54B4 0x
Mar 3 04:06:08.721: %CRYPTO-4-RECVD_PKT_NOT_IPSEC: Rec'd packet not an IPSEC pa
(ip) vrf/dest_addr= /255.255.255.255, src_addr= 0.0.0.0, prot= 17
Mar 3 04:06:18.914: %SYS-2-MALLOCFAIL: Memory allocation of 65548 bytes failed
Pool: I/O Free: 1655888 Cause: Memory fragmentation
Alternate Pool: None Free: 0 Cause: No Alternate pool

-Process= "Pool Manager", ipl= 0, pid= 5
-Traceback= 0x40C32960 0x400B0F98 0x400B66C8 0x400D1E18 0x4036FF40 0x400D54B4 0x
Mar 3 04:06:48.926: %SYS-2-MALLOCFAIL: Memory allocation of 65548 bytes failed
Pool: I/O Free: 1655888 Cause: Memory fragmentation
Alternate Pool: None Free: 0 Cause: No Alternate pool

Could you please suggest on the same

Dipu

Leo Laohoo · ‎03-02-2010

Can you upgrade your IOS and try again?

georgedipu · ‎03-02-2010

hi thanks for the reply

Current image is IOS of the router is:c2800nm-advsecurityk9-mz.124-4.T1.bin

Leo Laohoo · ‎03-02-2010

I'd recommend you upgrade your IOS since you've got Memory Allocation Errors.

Troubleshooting Memory Problems
http://www.cisco.com/en/US/products/sw/iosswrel/ps1831/products_tech_note09186a00800a6f3a.shtml

Tharak Abraham · ‎03-03-2010

Dipu,

Pls paste a show mem summ or show process here if possible ?

Pls check the mem requirement for running this image

Some known bugs are still open and some crazy features can be held responsible for this too..-:)

Please open a Tac case too.