03-03-2010 12:57 PM - edited 03-15-2019 09:37 PM
hi, i have several 6921 ip phones, and they work fine with a CUCMBE 7.1.2, but when i check the CME like SRST, they cannot register properly, the version of the CME is 7.1, is there any way to put them to work with CME 7.1 like SRST. i dont have any changes to change the IOS of the router to upgrade it to CME 8.X
thanks in advanced.
03-05-2010 06:58 AM
CME 7.1 Doesn't support 6921 phones, only 8.0.
03-17-2011 03:46 PM
.
03-17-2011 04:37 PM
Hi guys
How I make this upgrade to support 69xx phones?
I'm using CUCM 7.1 and Router 2911.
03-18-2011 06:34 PM
I need to configure my router as CME ?
03-19-2011 09:09 AM
You will need an IOS which has CME/SRST ver 8.0
Typically 15.1T upwards
03-23-2011 04:51 PM
Hi Pratick thanks for reply.
One more question.
I just save the new IOS with on the flash of Router?
03-24-2011 09:09 AM
Yes.
Before upgrading you have to consider the IOS hardware requirements i.e. DRam/Flash.
You have to upgrade the IOS on router by putting the IOS file on the router flash by using copy tftp: flash: command and then configure the router to boot with it by "boot system flash:
03-25-2011 04:54 PM
Ok thanks for you help !!!!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: