I trying to translate the 10 digit DNIS that comes in to a 2811 via PRI to a 5 digit DN begining with "2" only during SRST. Here is what I have configured in the router:
voice translation-rule 1
rule 1 /^813446/ /2/
rule 2 /^813513/ /2/
translate called 1
translation-profile incoming SRST
I used the test voice translation command to test my rules and they're getting translated correctly. The problem is that they don't work in fallback. If I apply the profile directly to the voice port, it works fine. I don't really want to apply these directly to the voice port since I only want to apply the rules during SRST. Any ideas what I'm doing wrong and how I can get this to work only in SRST? Any ideas what debugs I can look at to see what the router is doing? I don't think a ccapi will show me want I need.
Just an FYI, I've also tried translation-profile outgoing SRST with no luck.