I have two offices in two different locations, and would like to enable 7-digit local calling for both locations (i.e. dial 9 then your 7-digit number). Each location has it's own PRI gateway with a route list defined for it. However, when I have set it up this way, calls from the second location are trying to route out the first locations gateway. Here is what I have set up:
CUCM version is 6.1.3 BE
First site: Spokane
Route Pattern: 9.[2-9]XXXXXX
Partition assigned to RP: SpokaneUserPhones
Route List assigned to RP: Spokane_PRI_Outbound
Gateway is in Spokane
Second site: Sacramento
Route Pattern 9.[2-9]XXXXXX
Partition assigned to RP: SacramentoUserPhones
Route List assigned to RP: Sacrameneto_PRI_Outbound
Gateway is in Sacramento
When I call 9XXXXXXX from a DN in the SpokaneUserPhones, it goes out the Spokane gateway as it always did. However, when I call from a DN in the SacramentoUserPhones partition it also goes out the Spokane gateway. I was under the impression that setting the partition for the route plan enabled identical route plans to use different route lists by restricting which end user phones would match them. Is that possible and I just have it configured wrong?
You're nearly there...
The thing to consider is that each number (i.e route pattern or phone DN) has a partition. This determines what can call it.
Each device that is capable of dialling also has a Calling Search Space - this is a list of partitions which it can dial.
So you have put the Route Patterns in the Parititons that contain the phones for each site. What you will find is that the CSS assigned to the phones contains both SpokaneUserPhone and SacramentoUserPhones - and Spokane will be higher in the list. Therefore, as both route patterns are the same length, the tie breaker is the order of parititons in the CSS.
What you need to do is put each route pattern in a new Partition. Ensure that the Spokane phones have a CSS that includes the new partition for the Spokane route pattern, and that the Sacramento phones have a CSS that includes the new Sacramento route pattern's partition.
Spokane's phones CSS should not have the Sacramento route pattern partition, or vice versa...
Please rate helpful posts...