waas inline problem

Unanswered Question
Mar 5th, 2010
User Badges:

I cannot get inline adapter to work, on wae-512. lan port of inline groups is admin down


was#sh int inlineport 1/0/lan
Device name        : eth5. Bypass slave interface.
Packets Received   : 0
Packets Intercepted: 0
Packets Bridged    : 0
Packets Forwarded  : 0
Packets Dropped    : 0
Packets Received on native      : 0
Active flows for this interface : 0


Ethernet Driver Status
-------------------------
Type:Ethernet
Ethernet address:00:E0:ED:10:D0:B7
Maximum Transfer Unit Size:1500
Metric:1
Packets Received: 0
Input Errors: 0
Input Packets Dropped: 0
Input Packets Overruns: 0
Input Packets Frames: 0
Packet Sent: 0
Output Errors: 0
Output Packets Dropped: 0
Output Packets Overruns: 0
Output Packets Carrier: 0
Output Queue Length:1000
Collisions: 0
Base address:0x40c0
Flags:BROADCAST MULTICAST
Link State: Interface is administratively down, line protocol down
Mode: autoselect
was#

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
johutchins Fri, 08/27/2010 - 22:26
User Badges:

I have this same problem... where you able to solve this issue?  My interface is on a trunked interface.

draganskundric Sun, 08/29/2010 - 22:07
User Badges:

you must have connected and alive both ports in grou

p, wan and lan. In my case error was that I connected only wan port.


bye

Actions

This Discussion