Missing FXO Ports

Unanswered Question
Mar 5th, 2010
User Badges:

Greetings Everyone,


I have a client who is running a UC520 with 4 FXO ports.  Unfortunatly I need to configure one of them and it appears to not br registering.  I am running a fax machine off of the port and with a butt-set attached I can make out bound calls but inbound gives a busy.  My questions is how do I register the port.  Originally the port didnt even have a MAC or ephone configuration.  Please see the info below.


ephone-53 Mac:EF79.0CA4.0001 TCP socket:[-1] activeLine:0 UNREGISTERED
mediaActive:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0 caps:7
IP:10.1.10.2 12423 SCCP Gateway (AN)  keepalive 88 max_line 1
port 0/0/1
button 1: dn 52 number 297 CH1   IDLE

UC520#show stcapp device summary
Total Devices:           2
Total Calls in Progress: 0
Total Call Legs in Use:  0

Port       Device          Device   Call          Dev     Directory   Dev
Identifier Name            State    State         Type    Number      Cntl
---------- --------------- -------- ------------- -------    ----------- ----
0/0/2      AN1EF790CA40002 IS       IDLE           ALG     236        CME
0/0/3      AN1EF790CA40003 IS       IDLE           ALG     226        CME


Any assistance would be appriciated.


Cheers

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
paolo bevilacqua Fri, 03/05/2010 - 11:46
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

If looking at the configuration doesn't reveal, update image and reload.

Actions

This Discussion