Solved: S2S VPN ASA5520 and PIX501

nshoe18 · ‎03-05-2010

A PIX501 should be able to connect to an ASA5520 on a S2S VPN if they are on the same version of code, etc. correct?

Collin Clark · ‎03-05-2010

They do not need to be on the same version of code. The latest code for a PIX501 is 6.3(5) and an ASA can't run code that low. There is no problem swith each having different spec's.

Hope it helps.

View solution in original post

Patrick0711 · ‎03-05-2010

They both follow the RFCs, regardless of code version. You're good to go.

View solution in original post

Collin Clark · ‎03-05-2010

They do not need to be on the same version of code. The latest code for a PIX501 is 6.3(5) and an ASA can't run code that low. There is no problem swith each having different spec's.

Hope it helps.

Patrick0711 · ‎03-05-2010

They both follow the RFCs, regardless of code version. You're good to go.