Object tracking with Def Route

Unanswered Question
Mar 5th, 2010

Track and sla is up but default route override is not working. Per below, I have a static btwn the 172 host across WAN and tracking it. I am using Lo172 on both side so when I do a shut on HQ Lo172 side, the track should go down and the default route for 192 net should override the current def route for 10 but does not . If I try changing the admin dist for 192 from 10 to 8, it just installs the 0/0 for 192 net into the routing table so is a manual override for the 0/0 for 10 net. I do not want a manual override but an dynamic auto override. When I do a sh ip route track...it appears to verify that tracking it on

Remote (172.16.1.2/32)--------------WAN/track-----------------HQ (172.16.1.1/32)

ip route 0.0.0.0 0.0.0.0 192.168.1.1 10 name TO-DSL-ROUTER track 10

ip route 0.0.0.0 0.0.0.0 10.10.1.1 9 name TO-S-CORE1-UK

R-MaryAxe#SH TRACK

Load for five secs: 2%/0%; one minute: 3%; five minutes: 3%

Time source is NTP, 00:44:41.819 GMT Sat Mar 6 2010

Track 10

  IP SLA 10 reachability

  Reachability is Up

    3 changes, last change 00:13:09

  Delay up 20 secs, down 60 secs

  Latest operation return code: OK

  Latest RTT (millisecs) 36

  Tracked by:

    STATIC-IP-ROUTING 0

R-MaryAxe#sh ip route track-table
Load for five secs: 2%/0%; one minute: 3%; five minutes: 3%
Time source is NTP, 00:52:01.832 GMT Sat Mar 6 2010

ip route 0.0.0.0 0.0.0.0 192.168.1.1 10 name TO-DSL-ROUTER track 10 state is [up]

nevermind  - it fix...i put the track on the wrong def route, should be on

ip route 0.0.0.0 0.0.0.0 10.10.1.1 9 name TO-S-CORE1-UK track 10

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Giuseppe Larosa Sat, 03/06/2010 - 01:14

Hello Aamercado,

yes the track has to be on the primary route

I would also make the secondary route floating by using the AD parameter like

ip route 0.0.0.0 0.0.0.0 192.168.1.1 10 name TO-DSL-ROUTER 200

Hope to help

Giuseppe

Actions

This Discussion