CUCM 7.1 3b on IBM X 3650 M2

hari.kanan · ‎03-06-2010

HI all,

Iam trying to install CUCM 7.1 3b on a customer provided IBM x 3650-M2 Xeon 4C E5540 80W 2.53GHz/1066MHz FSB/8MB L3, 2x4GB with 4 *146 GB hardisk.when i insert the CUCM 7.1 system installation DVD it throws an error as "expecting 4 hardisks but 0 found" and "Expecting 2 CPU but one found".

Could any one tell me as how to install CUCM on this Server?

I have verified the CUCM support for this hardware and it shows positive.

Thanks

David Hailey · ‎03-07-2010

Have you build the RAID array and such with the manufacturer provided DVD/CD's for drivers, RAID, etc? If not, that's the first place to start. When you buy OEM from Cisco, the servers are pre-built to platform install. When you buy from the manufacturer they are typically empty images and need to be imaged to a point where hardware validation will work.

Hailey

Please rate helpful posts.

asafayan · ‎03-08-2010

Please see my post here:

https://supportforums.cisco.com/message/3031804

I'm having a very similar issue building Unity Connection 7.X on IBM servers.

Good Luck,

Amir

David Hailey · ‎03-08-2010

Hari,

See my last post here. https://supportforums.cisco.com/message/3031826#3031826

Please rate helpful posts!

Hailey