Tharak Abraham Mon, 03/08/2010 - 02:23
User Badges:
  • Bronze, 100 points or more

Pierluigi,


Yes, you could do that with ip local policy route-map


The trick is to force the traffic re-enter the device and then catch it on its way out.


1.create an access list which matches the inteneded traffic or the entire traffic (do not try in production n/w)

2.create a loopback interface

3.under the route-map, set your interface as the created loopback and set the prec or dscp

4.Apply the ip local policy route-map to router.


HTH,

Actions

This Discussion