cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1381
Views
0
Helpful
2
Replies

Can't import CTI Ports in CUE 3.1

amitkumarp
Level 4
Level 4

Hi Everyone,

I have recently migrated CallManager 4.1 to CUCM 7.1. Everything is working fine but CUE is not able to integrate with CUCM 7.1

I have provided the new credentials for Admin User and JTAPI user in CUE 3.1 and also made a new application user in CUCM 7.1.

When I verify CallManager Admin User in CUE web interface it shows Admin login successful, JTAPI login successful.

But when I try to search and import CTI Ports from CallManager, it shows me the error IOException: No such attribute.

Can anyone please help me with this issue?

Thanks,

Amit.   

1 Accepted Solution

Accepted Solutions

Aaron Harrison
VIP Alumni
VIP Alumni

Hi

See this compatibility chart:

http://www.cisco.com/en/US/docs/voice_ip_comm/unity_exp/compatibility/cuecomp.htm#CUCM

To run CM7.1, you need to be running 3.2.1 of CUE as a minimum.

Regards

Aaron

Please rate helpful posts...

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!

View solution in original post

2 Replies 2

Aaron Harrison
VIP Alumni
VIP Alumni

Hi

See this compatibility chart:

http://www.cisco.com/en/US/docs/voice_ip_comm/unity_exp/compatibility/cuecomp.htm#CUCM

To run CM7.1, you need to be running 3.2.1 of CUE as a minimum.

Regards

Aaron

Please rate helpful posts...

Aaron Please remember to rate helpful posts to identify useful responses, and mark 'Answered' if appropriate!

Hi aaronharrison,

Thanks alot for your reply. I will upgrade the CUE to version 3.2.1.

Thanks again..

Amit.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: