03-09-2010 01:14 AM - edited 03-15-2019 09:41 PM
Hello
What is the minimum IOS required and GUI file to run CME on a 2801 Router.
Flash is 64MB. Is there any other pre-requisite.
Thanks
ST
Solved! Go to Solution.
03-09-2010 02:34 AM
Recommend CME 7.1 minmum, any IOS version.
As indicated above, most memory work fine.
Please remember to rate useful posts clicking on the stars below.
03-09-2010 01:25 AM
Why do you want minimum IOS. The lower, the less features. Not a good idea.
03-09-2010 01:36 AM
Hello
I do agree what you mean, but on 2801 Flash is 64MB only and loading IOS supporting Voice and full-GUI.tar will not work. ( out of space )
So I was looking for recommendation.
Can you suggest.
03-09-2010 01:49 AM
Actually if fits in 64 MB no problem.
Or buy a $10 flash or USB stick. Most do work.
03-09-2010 02:16 AM
thanks for caring and replying.
Which IOS and GUI file you recommend for 64MB Flash to run CME.
which brand you recommend for external USB, supporting 2801. i am sure are you have experienced on this?
03-09-2010 02:34 AM
Recommend CME 7.1 minmum, any IOS version.
As indicated above, most memory work fine.
Please remember to rate useful posts clicking on the stars below.
03-09-2010 03:19 AM
Thanks Sir
Want to see you on 1st place in the forum.
03-09-2010 05:59 AM
Thank you for the nice rating and good luck!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide