cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
651
Views
0
Helpful
1
Replies

Sup 720 - SFP Uplinks

chrislisser
Level 1
Level 1

I am configuring a new 6509-E for a customer and I'm configuring it with the VS-S720-10G-3C supervisor to get the two SFP uplink ports.  However, I don't want to use them for VSS, I'd like to connect one using an SFP to a SONET over Ethernet connection. Can this be done or do I have to order a blade with SFP for GBIC connectors?

1 Accepted Solution

Accepted Solutions

Reza Sharifi
Hall of Fame
Hall of Fame

chrislisser wrote:

I am configuring a new 6509-E for a customer and I'm configuring it with the VS-S720-10G-3C supervisor to get the two SFP uplink ports.  However, I don't want to use them for VSS, I'd like to connect one using an SFP to a SONET over Ethernet connection. Can this be done or do I have to order a blade with SFP for GBIC connectors?

Hi Chris,

On Sup-720-VS the SFP ports are 5/1 and 5/2. The copper port is 5/3 and the 10Gig ports are 5/4 and 5/5.

HTH

Reza

View solution in original post

1 Reply 1

Reza Sharifi
Hall of Fame
Hall of Fame

chrislisser wrote:

I am configuring a new 6509-E for a customer and I'm configuring it with the VS-S720-10G-3C supervisor to get the two SFP uplink ports.  However, I don't want to use them for VSS, I'd like to connect one using an SFP to a SONET over Ethernet connection. Can this be done or do I have to order a blade with SFP for GBIC connectors?

Hi Chris,

On Sup-720-VS the SFP ports are 5/1 and 5/2. The copper port is 5/3 and the 10Gig ports are 5/4 and 5/5.

HTH

Reza

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: