Create DMZ on a Zone Based Policy IOS Firewall

Unanswered Question
Mar 12th, 2010

Dear All,

I have created Zone Based Policy IOS Firewall on Cisco 3600. I created it using SDM.

While creating I used Basic Firewall wizard.

However After few months it appeared that I need DMZ zone (DMZ is not created using basic firewall wizard, but only with using advanced fw wizard).

My question is if it is possible to create additional zone and make it work like DMZ without starting whole wizard for creating advanced firewall from the beginning.

If it is possible I will appreciate any help on how to do that.

Thank you in advance

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 3 (1 ratings)
Loading.
Ganesh Hariharan Sat, 03/13/2010 - 00:42

Dear All,

I have created Zone Based Policy IOS Firewall on Cisco 3600. I created it using SDM.

While creating I used Basic Firewall wizard.

However After few months it appeared that I need DMZ zone (DMZ is not created using basic firewall wizard, but only with using advanced fw wizard).

My question is if it is possible to create additional zone and make it work like DMZ without starting whole wizard for creating advanced firewall from the beginning.

If it is possible I will appreciate any help on how to do that.

Thank you in advance

Hi,

Check out the below links it will clears your query !!

http://www.cisco.com/en/US/prod/vpndevc/ps5708/ps5710/ps1018/prod_configuration_example0900aecd804f1776.pdf

http://www.cisco.com/en/US/products/sw/secursw/ps1018/products_configuration_example09186a0080a0eac7.shtml

Hope to Help !!

Remember to rate the helpful post

Ganesh.H

Actions

This Discussion

Related Content