Solved: WS-SUP720-3B and 10G compatibility

erisanchez · ‎03-12-2010

Im trying to find information on using sup720-3b and use 10g line cards. Can anyone show me a link of a compatibility matrix for 3B versus 3C?

Jon Marshall · ‎03-12-2010

erisanchez@firstam.com

Im trying to find information on using sup720-3b and use 10g line cards. Can anyone show me a link of a compatibility matrix for 3B versus 3C?

Not entirely sure what you are looking for ? Have a look at Table 2 in this doc and see if it answers your question(s) -

http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps708/qa_cisco_catalyst_6500_series_16port_10gigabit_ethernet_module.html

Jon

View solution in original post

Jon Marshall · ‎03-12-2010

erisanchez@firstam.com

Im trying to find information on using sup720-3b and use 10g line cards. Can anyone show me a link of a compatibility matrix for 3B versus 3C?

Not entirely sure what you are looking for ? Have a look at Table 2 in this doc and see if it answers your question(s) -

http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps708/qa_cisco_catalyst_6500_series_16port_10gigabit_ethernet_module.html

Jon

erisanchez · ‎03-12-2010

Overall, I am trying to find any information if I need to upgrade my sups to 720-3Cs or can I cost save and upgrade the IOS on my 720-3Bs. Would a 6716-10G line card be compatibable with a 720-3B?

Jon Marshall · ‎03-12-2010

erisanchez@firstam.com

Overall, I am trying to find any information if I need to upgrade my sups to 720-3Cs or can I cost save and upgrade the IOS on my 720-3Bs. Would a 6716-10G line card be compatibable with a 720-3B?

You will be fine with a Sup720-3B. From the same doc i sent a link to -

Q. Which supervisor engine supports the 16-port 10 Gigabit Ethernet module?

A. The 16-port 10 Gigabit Ethernet module works with any Virtual Switching Supervisor Engine 720-10G or Supervisor Engine 720, including VS-S720-10G-3C, VS-S720-10G-3CXL, WS-Sup720, WS-Sup720-3B, and WS-Sup720-3BXL.

Jon

erisanchez · ‎03-12-2010

Jon:

tyvm. I appreciate your assistance with this.

comeback313 · ‎12-07-2015

sh version

Cisco IOS Software, c7600s72033_rp Software (c7600s72033_rp-IPSERVICESK9-M), Version 15.2(4)S3a, RELEASE SOFTWARE (fc1)

Supervisor Engine 720 (Active) WS-SUP720-3B SAL1407B6J0

Does it support for below line cards

WS-X6708-10G-3C=	C6K 8 port 10 Gigabit Ethernet module with DFC3C (req. X2)
WS-X6908-10G-2T=	C6K 8 port 10 Gigabit Ethernet module with DFC4 (Trustsec) S

Pete Cowen · ‎04-04-2017

Hi. Did you ever get the WS-X6708-10G-3C= working with a SUP720-3B.

I have a short term fix requirement for 10G into 6500 before refresh to 6708 Sup6T.

Joseph W. Doherty · ‎04-04-2017

I believe we have 6708 line cards working with both sup720-3Bs and VS-S720s. The 6708 will not work with a sup2T (and probably not a sup6T either.)

To work with a sup2T, and you need a CFC or DFC4 line card, and the 6708's DFC3C cannot be upgraded or removed.

Pete Cowen · ‎04-04-2017

Thanks Joseph,

Small typo above, I meant refresh to 6807 chassis with Sup6T so the 6708 cards would be traded in for 6800 16port 10G.