2811 multiple h323-providers

Unanswered Question


I have a 2811 and two ISP with h323-voice (see scheme at attach). ISP-1 requires use interface0/0 address for voice communication. ISP-2 requires use interface0/1 address for voice communications. 2811 are registered as h323-gateway in UCM with address How can I configure 2811 to use correct VOIP-adress to setup voice communications with each ISP? How to configure h323-gateway to use diffirent interface with multiple h323-peers?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Tommer Catlin Mon, 03/15/2010 - 09:05
User Badges:
  • Green, 3000 points or more

You should be able to use the bind command for each dial peer so it takes the "correct" route.


This Discussion