I have internal network 192.168.1.x. I have ASA haivng public IP range 220.127.116.11/24.
My requirement is, whenever internal host 192.168.1.1 wants to talk to external server 18.104.22.168/24, source address should translate to 22.214.171.124.
I have done two things and is working fine as per my requirement.
ASA(config)# access-list POLICYNAT-B extended permit ip host 192.168.1.1 126.96.36.199 255.255.255.0
ASA(config)# static(inside,outside) 188.8.131.52 access-list POLICYNAT-A
Now I have three questions-
1. Is this NAT will two sided, I mean if 184.108.40.206/24 subnet wants to reach 220.127.116.11, then what happened? Any source or destional address translation will occur in this case?
2. If traffic is coming from outside 18.104.22.168 network, then internal switch will send the traiffc to ASA or destination IP as 22.214.171.124
2. Is this policy only work if traffic is initiated from inside network?
Thanks a lot for your comments rupesh.
if you find the post is helpful,just give a ratting to it.This will be helpful to others while they are going through this post,