Solved: 4510R with dual Sup 6 modules

connie · ‎03-16-2010

Hi All

I just want to make 100% sure that the supervisor 6 modules for the 4510R chassis must get installed in slots 1 and 2 to run them in full redundancy.

Pictures confuse me. :-)

C

Jon Marshall · ‎03-16-2010

connie@petech.ac.za

Hi All

I just want to make 100% sure that the supervisor 6 modules for the 4510R chassis must get installed in slots 1 and 2 to run them in full redundancy.

Pictures confuse me. :-)

C

Yes, see this doc -

http://www.cisco.com/en/US/products/hw/switches/ps4324/ps5653/index.html

Jon

View solution in original post

Jon Marshall · ‎03-16-2010

connie@petech.ac.za

Hi All

I just want to make 100% sure that the supervisor 6 modules for the 4510R chassis must get installed in slots 1 and 2 to run them in full redundancy.

Pictures confuse me. :-)

C

Yes, see this doc -

http://www.cisco.com/en/US/products/hw/switches/ps4324/ps5653/index.html

Jon

connie · ‎03-16-2010

Great, thanks Jon - I just wanted to be 100% sure before we release the final config for this switch. Nothing worse than having to spend two days going up a mountain to fix a config error!

Cheers

C

PS: Apologies for the typo in the subject line - it should be a 4510R switch!