03-16-2010 07:38 AM - edited 03-15-2019 09:48 PM
Hello guys !!
I have a callmanager express 7.1 ..i have the following :
When a make forward all from my desk phone to my mobile phone and i call from another mobile number to my fix i dont see the original calling number ..instead i receive the AA number.
But when i make a call from my desk phone to my mobile or another public number i see my DDI number...
I make a debug isdn q931 and i see the original calling number in the debugg...
!
Sending Complete
Bearer Capability i = 0x8090A3
Standard = CCITT
Transfer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0x82
Preferred, B2
Calling Party Number i = 0x0183, '689037889'
Plan:ISDN, Type:Unknown
Called Party Number i = 0xA1, '917100279'
Plan:ISDN, Type:National
146016: Mar 16 14:30:56.800: ISDN BR0/0/0 Q931: TX -> CALL_PROC pd = 8 callref = 0xE5
Channel ID i = 0x8A
Exclusive, B2
146017: Mar 16 14:30:56.812: ISDN BR0/0/0 Q931: Applying typeplan for sw-type 0x1 is 0x0 0x1, Calling num 689037889
146018: Mar 16 14:30:56.812: ISDN BR0/0/0 Q931: Sending SETUP callref = 0x002D callID = 0x8260 switch = basic-net3 interface = User
146019: Mar 16 14:30:56.900: ISDN BR0/0/0 Q931: TX -> SETUP pd = 8 callref = 0x2D
Bearer Capability i = 0x8090A3
Standard = CCITT
Transfer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0x89
Exclusive, B1
Calling Party Number i = 0x0183, '689037889'
Plan:ISDN, Type:Unknown
Called Party Number i = 0xA1, '687588356'
Plan:ISDN, Type:National
Sending Complete
146020: Mar 16 14:30:57.180: ISDN BR0/0/0 Q931: RX <- CALL_PROC pd = 8 callref = 0xAD
Channel ID i = 0x89
Exclusive, B1
146021: Mar 16 14:31:00.811: ISDN BR0/0/0 Q931: RX <- ALERTING pd = 8 callref = 0xAD
Progress Ind i = 0x8488 - In-band info or appropriate now available
146022: Mar 16 14:31:00.823: ISDN BR0/0/0 Q931: TX -> ALERTING pd = 8 callref = 0xE5
Progress Ind i = 0x8488 - In-band info or appropriate now available
146023: Mar 16 14:31:07.162: ISDN BR0/0/0 Q931: RX <- DISCONNECT pd = 8 callref = 0x65
Cause i = 0x8090 - Normal call clearing
146024: Mar 16 14:31:07.166: ISDN BR0/0/0 Q931: TX -> RELEASE pd = 8 callref = 0xE5
Cause i = 0x8090 - Normal call clearing
146025: Mar 16 14:31:07.266: ISDN BR0/0/0 Q931: TX -> DISCONNECT pd = 8 callref = 0x2D
Cause i = 0x8090 - Normal call clearing
1A2F29ED90
Can help you help me with some steps?
thanks
C.
03-16-2010 08:32 AM
You cannot see the orginal calling number.
Clearly, telco do not allow numbers outside DDI range.
03-18-2010 01:26 AM
Thanks for your help,i have my unity specialist exam now i rate you
later
Carlos
El 16/03/2010, a las 16:33, "p.bevilacqua"
> escribió:
carloszzz27,
>
A new message was posted in the Discussion thread "Help with CME 7.1
forwarding with original calling number":
>
https://supportforums.cisco.com/message/3036182#3036182
>
Author : p.bevilacqua
Email : pbevila@fastmail.fm
Profile : https://supportforums.cisco.com/people/p.bevilacqua
>
Message:
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: