cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
395
Views
0
Helpful
2
Replies

Help with CME 7.1 forwarding with original calling number

carloszzz27
Level 1
Level 1

Hello guys !!

I have a callmanager express 7.1 ..i have the following :

When a make forward all from my desk phone to my mobile phone and i call from another mobile number to my fix i dont see the original calling number ..instead i receive the AA number.

But when i make a call from my desk phone to my mobile or another public number i see my DDI number...

I make a debug isdn q931 and i see the original calling number in the debugg...

!

        Sending Complete

        Bearer Capability i = 0x8090A3

                Standard = CCITT

                Transfer Capability = Speech 

                Transfer Mode = Circuit

                Transfer Rate = 64 kbit/s

        Channel ID i = 0x82

                Preferred, B2

        Calling Party Number i = 0x0183, '689037889'

                Plan:ISDN, Type:Unknown

        Called Party Number i = 0xA1, '917100279'

                Plan:ISDN, Type:National

146016: Mar 16 14:30:56.800: ISDN BR0/0/0 Q931: TX -> CALL_PROC pd = 8  callref = 0xE5

        Channel ID i = 0x8A

                Exclusive, B2

146017: Mar 16 14:30:56.812: ISDN BR0/0/0 Q931: Applying typeplan for sw-type 0x1 is 0x0 0x1, Calling num 689037889

146018: Mar 16 14:30:56.812: ISDN BR0/0/0 Q931: Sending SETUP  callref = 0x002D callID = 0x8260 switch = basic-net3 interface = User

146019: Mar 16 14:30:56.900: ISDN BR0/0/0 Q931: TX -> SETUP pd = 8  callref = 0x2D

        Bearer Capability i = 0x8090A3

                Standard = CCITT

                Transfer Capability = Speech 

                Transfer Mode = Circuit

                Transfer Rate = 64 kbit/s

        Channel ID i = 0x89

                Exclusive, B1

        Calling Party Number i = 0x0183, '689037889'

                Plan:ISDN, Type:Unknown

        Called Party Number i = 0xA1, '687588356'

                Plan:ISDN, Type:National

        Sending Complete

146020: Mar 16 14:30:57.180: ISDN BR0/0/0 Q931: RX <- CALL_PROC pd = 8  callref = 0xAD

        Channel ID i = 0x89

                Exclusive, B1

146021: Mar 16 14:31:00.811: ISDN BR0/0/0 Q931: RX <- ALERTING pd = 8  callref = 0xAD

        Progress Ind i = 0x8488 - In-band info or appropriate now available

146022: Mar 16 14:31:00.823: ISDN BR0/0/0 Q931: TX -> ALERTING pd = 8  callref = 0xE5

        Progress Ind i = 0x8488 - In-band info or appropriate now available

146023: Mar 16 14:31:07.162: ISDN BR0/0/0 Q931: RX <- DISCONNECT pd = 8  callref = 0x65

        Cause i = 0x8090 - Normal call clearing

146024: Mar 16 14:31:07.166: ISDN BR0/0/0 Q931: TX -> RELEASE pd = 8  callref = 0xE5

        Cause i = 0x8090 - Normal call clearing

146025: Mar 16 14:31:07.266: ISDN BR0/0/0 Q931: TX -> DISCONNECT pd = 8  callref = 0x2D

        Cause i = 0x8090 - Normal call clearing

1A2F29ED90

Can help you help me with some steps?

thanks

C.

2 Replies 2

paolo bevilacqua
Hall of Fame
Hall of Fame

You cannot see the orginal calling number.

Clearly, telco do not allow numbers outside DDI range.

Thanks for your help,i have my unity specialist exam now i rate you

later

Carlos

El 16/03/2010, a las 16:33, "p.bevilacqua"

> escribió:

carloszzz27,

>

A new message was posted in the Discussion thread "Help with CME 7.1

forwarding with original calling number":

>

https://supportforums.cisco.com/message/3036182#3036182

>

Author : p.bevilacqua

Email : pbevila@fastmail.fm

Profile : https://supportforums.cisco.com/people/p.bevilacqua

>

Message:

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: