BGP

Unanswered Question
Mar 16th, 2010
User Badges:

When I run sh run on the router, I don't any information about BGP at all in the output. However, when I run sh IP bgp..., I can see the IBGP and EBGP information. I have security level of 15. Any reason why the 'show running config" does not include BGP info?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Tharak Abraham Tue, 03/16/2010 - 21:48
User Badges:
  • Bronze, 100 points or more

Hi,


Is that only for BGP config or is it the same for IGP too ?


try "sh run | section bgp" or "sh run | begin bgp" or "sh run | in router bgp" et al...just curious..-:)

ccie_rooky Tue, 03/16/2010 - 22:04
User Badges:

It is for both IBGP and EBGP. Nothing shows at all.

KARUPPUCHAMY MA... Tue, 03/16/2010 - 22:35
User Badges:
  • Silver, 250 points or more

Hi,


run the below command , you will get all the BGP config info


#sh run | b r bgp


Regards

Karuppu

ccie_rooky Wed, 03/17/2010 - 10:03
User Badges:

Thanks for your help. But why

the BGP info doesn't show up if I don't use the output modifier?


Thanks.

John Blakley Wed, 03/17/2010 - 14:19
User Badges:
  • Purple, 4500 points or more

You may want to look at updating the IOS. I seem to remember someone else on here having the same issue until they updated. What type of equipment are you running and IOS version?


John

Actions

This Discussion