CUCM and Avaya

Unanswered Question
Mar 16th, 2010

I am integrating a CUCM 7.02 with a S8400 Avay PBX through h.323.

I added a h.323 gateway in CUCM with Avaya IP address and tested the integration.

But I only receive calls from Avaya PBX. I am not able to make calls from CUCM to Avaya.

The codec is setup to G711ulaw. I´ve tried  Fast Start with Media  Termination Point, but it didn´t work.

Does someone already experienced this kind of problem?

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Aaron Harrison Wed, 03/17/2010 - 01:40

Hi

Have you added a route pattern to point send calls to the H.323 gateway?

Thanks

Aaron

cfujimura Fri, 03/19/2010 - 09:59

Aaron, thanks for the reply.

Related to the route patterns, they are pointing to the gateway.

I solved the problem with CUBE. I´ve used a sip trunk to the cube and a H.323 call leg to avaya (I´ve configured that on CUBE).

After that, calls are working normally.

Carlos Fujimura.

Actions

This Discussion