WAP4410N Duplicate IP's when Repeating

Unanswered Question
Mar 18th, 2010
User Badges:

First here is our network breakdown


8 Windows 2008 Servers - uneffected

5 Windows 2003 Servers - effected with dupe IP's



We have AP - A, B and C all configured static and outside of our DHCP scope

A - 104.240

B - 104.241

C - 104.242


WAP A is setup to allow the MAC's of A and B to repeat its signal


The issue starts about 1-2 minutes after I set B and C to client/repeater and select A in site survey then save the settings.  Obviously its weird that only our 2003 servers are getting this error



The system detected an address conflict for IP address 192.168.105.201 with the system having network hardware address *MAC ADDRESS OF ROUTER A*. Network operations on this system may be disrupted as a result.


Any thoughts?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
ricardo__ Thu, 07/29/2010 - 03:48
User Badges:

I have the same problem, when i put my two WAP4410N to work in client/repeater mode, all the host in the network starts the advisory alert that the ip is used by an other host.


Any solution?

Actions

This Discussion

Related Content