Display of Parked Call Extension

j.eggen · ‎03-18-2010

Is there a way to configure the parked call extension to stay on the phone display longer or until the next phone action? I think our settings is about 5 seconds and sometimes people forget where the call was parked or forget to make a note of it. We are using a UC560 with SPA504G phones.

Jaime Valencia · ‎03-18-2010

You can't modify that, however you can tweak the reminders to make sure they know of the parked calls.

park-slot

http://www.cisco.com/en/US/partner/docs/voice_ip_comm/cucme/command/reference/cme_p1ht.html#wp1106288

timeout seconds

(Optional) Sets the call-park reminder timeout in seconds. Range: 0 to 65535. This reminder sends a 1-second ring to the IP phone that parked the call and displays a message on the LCD panel of all phones in the Cisco Unified CME system, indicating that a call is on hold. By default, the reminder ring is sent only to the phone that parked the call.

limit count

(Optional) Sets a limit on the number of reminder or retry timeouts. Range: 1 to 65535.

HTH

java

If this helps, please rate

www.cisco.com/go/pdihelpdesk

HTH

java

if this helps, please rate