Solved: NAC don't insert CAS.

wsilveira · ‎03-18-2010

Hi,

I have a problem when go to insert a Nac Server in our Nac Manager the message that appear is "Failed to add server: Maximum limit for Clean Access Servers supported has been reached " but I don´t have any Server yet in this Nac Manager.

Anybody have an idea?

Regards,

Wagner Silveira

Faisal Sehbai · ‎03-20-2010

Posting resolution for the record: Customer had bad licenses as they were issued to the MAC addres of the CASs. Licenses are always supposed to be issued to the MAC address of the CAM.

View solution in original post

Jennifer Halim · ‎03-18-2010

Please check if you have license for the CAS on your CAM.

You would need to have 2 license installed on the CAM:

- 1 for the CAM itself

- another one for CAS (how many CAS you can add to the CAM)

Here is more information on Clean Access licensing:

http://www.cisco.com/en/US/docs/security/nac/appliance/support_guide/license.html

Faisal Sehbai · ‎03-20-2010

Posting resolution for the record: Customer had bad licenses as they were issued to the MAC addres of the CASs. Licenses are always supposed to be issued to the MAC address of the CAM.