Solved: ISDN BRI type for Luxembourg

richard.jackson · ‎03-19-2010

Hi,

I have been tasked with setting up a remote office in Luxembourg running a H323 SRST gateway off CCM back in the U.K.. This has a BRI connection to the PSTN and Internet Via Ethernet connected to it. (As I will only have remote access to this and will not be in Luxembourg to fit it, I would like to get it correct first time)

Please could someone advise if the ISDN switch type should be basic-net3 (Europe) or VN3 (France). I am guessing basic-net3 is the one. Google has let me down!.

Also I have noticed that there is no Locale for Lux.. would the Frence or German one be expected for Tones?

Any other info that someone thinks is relevant would be much appreciated

paolo bevilacqua · ‎03-19-2010

net3 like everywhere else, including France.

BRI does not use tones and their configuration is irrelevant.

View solution in original post

paolo bevilacqua · ‎03-19-2010

net3 like everywhere else, including France.

BRI does not use tones and their configuration is irrelevant.

richard.jackson · ‎03-19-2010

many thanks for the response, however the locals I need to install are on the CallManager

paolo bevilacqua · ‎03-19-2010

They speak three languages there, so check their preferences.

Thank you for the nice rating, and good luck.