03-19-2010 08:22 AM - edited 03-21-2019 02:20 AM
Hi:
Can anyone tell me why or how to fix an issue with the Cisco UC500. We are getting an unknown SIP Registration message from the Cisco UC500. I don't even have the '6782367070' programmed anywhere in UC500. So, I don't how it is sending out this SIP Register message to our network.
Thanks,
REGISTER sip:192.168.1.1:5060 SIP/2.0
Via: SIP/2.0/UDP 192.168.1.2:5060;branch=z9hG4bK458758
From: <sip:6782367070@192.168.1.1>;tag=522D180-24EB
To: <sip:6782367070@192.168.1.1>
Date: Tue, 16 Mar 2010 14:34:37 GMT
Call-ID: 5AE11A07-2F7711DF-8003C075-80F32E1A
User-Agent: Cisco-SIPGateway/IOS-12.x
Max-Forwards: 70
Timestamp: 1268750077C
Seq: 557 REGISTER
Contact: <sip:6782367070@192.168.1.2:5060>
Expires: 70
Supported: path
Content-Length: 0
03-19-2010 02:23 PM
Check you UC and look at the config (CLI) under sip-ua, or in CCA under Telephony -> Trunks -> SIP Trunks
Good Luck
03-20-2010 03:00 PM
Check the below:
show sip-ua registar status
Does the 678xxxxxxx number show up there? If so what is the peer tag value associated to it? Based on that it maybe config under "sip-ua" or an extension (ephone-dn). Are you sure this DID was never added in via CCA (or CLI) for a hunt group or main caller ID etc.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: