ATA186 CM 6.1(3) Multicast MOH problem

Unanswered Question
Mar 19th, 2010
User Badges:

I have an ATA 186 (firmware sccp 3.2.4) with CCM, the moh is configured as multicast, the CCM and the ATA are in the same vlan, the multicast moh server is the CCM.

when the attached analog phone is placed on hold for the first time from an IP phone it can hear the moh... but when the analog phone is placed hold off it continues to hear the moh, and the only way for stopping the moh is to reset the ATA (!)...

The multicast moh between IP Phones instead works well...

Any solution to this singular behaviour for the ATA?

Many thanks


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)


This Discussion