Annunciator for SIP Phones

Unanswered Question
Mar 19th, 2010

Hi all,

I configured all phones with SIP firmwares (7942 and 7965) with CUCM 7.1.3 release. It seems that annunicator is not working. I have tested with SCCP phone and it's working fine.

It seems that annunciator deal only with sccp. Is there any way to configure Annunciator in SIP.



I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Jaime Valencia Fri, 03/19/2010 - 19:50


An annunciator is a software function of the Cisco IP Voice Media  Streaming Application that provides the ability to stream spoken  messages or various call progress tones from the system to a user. It is  capable of   sending multiple one-way RTP streams to devices such as  Cisco IP phones or gateways, and it uses SCCP messages to establish the  RTP stream. The device must be capable of SCCP to utilize this feature.

There is no way to modify the behavior.



If this helps, please rate

is_mail123 Sun, 12/08/2013 - 01:06

hi ,

i have sip 6921 phones working with annunciator .

can u tell me how this is working

cucm 8.5

sip  firmware for phones


This Discussion