cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
3664
Views
0
Helpful
3
Replies

Cisco 2911 versus Juniper SRX240H

baotran09
Level 1
Level 1

Hi,

Im planning to deploy GWIP between our headquarter and the remote branch.

As you know I'm a Cisco man and I dont have exerience in Juniper, however it would be good for me to learn new technologies.

I'm comparing between Cisco 2911 ISR router and Juniper SRX240H.

We have purchased 10Mb WAN link. According to the specs, Cisco 2900 can only support up to 75 Mbps WAN while SRX240H can supprot up to 1.5 Gbps.

Any feedback would be greatly appreciated.

Thanks

3 Replies 3

paolo bevilacqua
Hall of Fame
Hall of Fame

Surely they are different boxes. Compare them and their price to see what better matches your needs.

Leo Laohoo
Hall of Fame
Hall of Fame

Telstra GWIP?

It doesn't matter what speed the router can/can't do.  You have a 10mb GWIP line so a 2900 can do just fine.  If you're going to argue that you may bring the WAN link to say 30-40mb, then maybe the 2900 is not enough if you consider putting encryption.

Reza Sharifi
Hall of Fame
Hall of Fame

Hi,

SRX products are not really used as routers.  They are used as firewall/IDS/IPS.  You can't really compare SRX with 2900 series, however you can compare the 2900 series with Juniper J-series routers.

http://www.juniper.net/us/en/products-services/routing/j-series/

HTH

Reza

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco