Cisco 2921 routers and CUCM

Answered Question
Mar 22nd, 2010
User Badges:

Hi, we are in the process of upgrading all our gear and we currently run CUCM 6.1.1.  We are looking at purchasing 2921 routers but my concern is that when I look in the Call Manager to add a Gateway there is no 2921 router.  Do we need to upgrade CM for these to work or is there another way I can add these routers?


Thanks,

Linda

Correct Answer by Rob Huffman about 7 years 3 months ago

Hi Linda,


You would need to upgrade to CUCM 6.1(5)


Active Platforms


Cisco 2901, 2911,2921, and 2951



Minimum Cisco Unified Communications Manager Release


6.1.5, 7.1.3 or 8.0



From these good notes;


http://www.cisco.com/en/US/prod/collateral/routers/ps259/product_data_sheet0900aecd8057f2e0.pdf



Cheers!

Rob

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Rob Huffman Mon, 03/22/2010 - 05:26
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi Linda,


You would need to upgrade to CUCM 6.1(5)


Active Platforms


Cisco 2901, 2911,2921, and 2951



Minimum Cisco Unified Communications Manager Release


6.1.5, 7.1.3 or 8.0



From these good notes;


http://www.cisco.com/en/US/prod/collateral/routers/ps259/product_data_sheet0900aecd8057f2e0.pdf



Cheers!

Rob

Actions

This Discussion