Upgrade 7961g to SIP Firmware

Answered Question
Mar 22nd, 2010
User Badges:

Hi,


I need to change the firmware on a 7961g from sccp to a SIP image and I have downloaded the latest version 9.0.2 and it is a .cop.sgn file.   Does anyone know how I get that onto the phone or what I do with it.   All the guide I have found on the internet use .bin and .loads files so I'm a little unsure of what to do or if this is the right thing.


Many Thanks

Correct Answer by markbatts about 7 years 2 months ago

Hi,


I assume that you just have the phone and not Callmanager? if thats the case then this url should be useful


http://www.cisco.com/en/US/products/hw/phones/ps379/products_tech_note09186a0080094584.shtml


What you have downloaded is the SIP image for a Callmanager running Linux which is no good.What you need is the zip file

which is in the same place you got that file.


Cheers

Mark


HTH


Please rate useful posts

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
markbatts Mon, 03/22/2010 - 05:50
User Badges:
  • Bronze, 100 points or more

Hi,


I assume that you just have the phone and not Callmanager? if thats the case then this url should be useful


http://www.cisco.com/en/US/products/hw/phones/ps379/products_tech_note09186a0080094584.shtml


What you have downloaded is the SIP image for a Callmanager running Linux which is no good.What you need is the zip file

which is in the same place you got that file.


Cheers

Mark


HTH


Please rate useful posts

brianpocock Mon, 03/22/2010 - 05:57
User Badges:

That sounds about right, Ill download the right one,


Cheers

brianpocock Tue, 03/23/2010 - 08:47
User Badges:

Would you be able to tell me which one I need to download as there were three there, is this the one I need: cmterm-7941_7961-sip.9-0-2SR1.zip


Thanks.

Cory Andrews Mon, 03/22/2010 - 07:16
User Badges:

There is a nice guide to SIP conversion for the Cisco 7961G

Actions

This Discussion