Continuous Wireless Client Associations and De-authentications

Answered Question
Mar 22nd, 2010
User Badges:

I have a remote site whose wlan consist of a 2112-WLC and twelve 1142N's.  The issue I am seeing is that several clients will associate continuously   throughout the day.  This does not occur for any specific client or ap.  These multiple associations appear to take place every 5-10 minutes most of the time.  I have 4 other sites using the same wireless network equipment and I do not see this problem.  I have verified the ap signal strengths and verified that the noise and interference levels are ok.  Any assistance provided will be very appreciated.

Correct Answer by George Stefanick about 7 years 4 months ago

Is enable session time out enabled


WLANS-->ADVANCED-->Look at enable session time out ... what does it say ?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
dancampb Mon, 03/22/2010 - 11:28
User Badges:
  • Cisco Employee,

Are the clients roaming between AP's or reassociating to the same AP?

LEN SNEED Mon, 03/22/2010 - 11:49
User Badges:

They appear to be associating to the same one multiple times until they move to another location.

Correct Answer
George Stefanick Mon, 03/22/2010 - 22:33
User Badges:
  • Purple, 4500 points or more
  • Community Spotlight Award,

    Best Publication, October 2015

Is enable session time out enabled


WLANS-->ADVANCED-->Look at enable session time out ... what does it say ?

LEN SNEED Tue, 03/23/2010 - 06:07
User Badges:

Yes, the enable session timeout is enabled and is

configured for 24 hours.

Actions

This Discussion

Related Content

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode