Solved: DFM device discovery

dionjiles · ‎03-22-2010

Is there a way to disable the built-in rediscovery for DFM.

Every week when the rediscovers network devices I lose device alerting capability and I have to reboot the server because DFM get hungs when

try to rediscover network devices.

Joe Clarke · ‎03-22-2010

There is a problem with the default schedule job in the databases. You should be able to clean this up by opening a TAC service request. There is a way to purge this job from the database, then create your own scheduled job which you can then suspend and resume as needed.

View solution in original post

Joe Clarke · ‎03-22-2010

You cannot delete or edit the default schedule, but you can suspend it. Just go to DFM > Configuration > Other Configurations > Rediscovery Schedule, and suspend the Default_Schedule option.

dionjiles · ‎03-22-2010

Thanks for the quick response......I get an error when I try to suspend rediscovery. "Cannot Suspend the discovery"

It tells me to check the rediscovery.log for details.

Joe Clarke · ‎03-22-2010

What errors are in the rediscovery.log?

dionjiles · ‎03-22-2010

Please see attached.

Joe Clarke · ‎03-22-2010

There is a problem with the default schedule job in the databases. You should be able to clean this up by opening a TAC service request. There is a way to purge this job from the database, then create your own scheduled job which you can then suspend and resume as needed.

dionjiles · ‎03-23-2010

Thanks I will open a TAC Request in regards to this issue.